Toroids, RF-Cores, Coils


Multitude of Toroid models, logo

by Tony van Roon


Toroids & RF-chokes, come in different shapes and sizes, like in donut, tube, and stick models, and are used on a large scale in a variety of electronic equipment. Toroids can be of different materials, like Ferrite or Iron.The most common applications today are filtering, and transformers.If you check your cable at the back of your computer monitor you will find one, or even two, on the cable going to your computer.They are also used in Power Supplies, Radio, Ham Radio, Scanners, Transmitters, Transformers, and Electro-Magnet applications.
Here is an excellent link to provide more ’Amidon’ information: Bytemark Inc.

Below I have made up 4 tables with the most common-size toroids.I hope they can be of some assistance to you.The µ stands for the permeability factor of the core.All measurements are given in ’inches’.I don’t have or know the info in mm (metric) so don’t ask.

Red E Cores

Black W Cores

Yello SF Cores

Ferrite Toroids

Iron Powder Properties:MaterialBasic-powderPermeability (µ)Freq.Range (MHz)Color-Code 0Phenolic 1 100 - 300Tan 1Carbonyl C 200.5 - 5.0Blue 2Carbonyl E 102.0 - 30.0 Red 3Carbonyl HP35 0.05 - 0.5Gray 6Carbonyl SF810 - 50 Yellow 7Carbonyl TH9 5.0 - 35.0 White 10 Carbonyl W 630 - 100Black 12 Synthetic Oxide450 - 200Green/White 15 Carbonyl GS6 25 0.10 - 2.0Red/White 17 Carbonyl 450 - 200Blue/Yellow 26 Special75 LF Filters,Chokes Yellow/White

*Non Linear:Material #17 was developed as a temperature stable (50) alternative to the #12 (170).Frequency ranges shown are for best ’Q’/Useful over broader frequency ranges with lower ’Q’.

Here is a good link for more information and dimensions (including metric) on toroids: TOROID DIMENSIONS

Toroid used with Ham Radio

The photograph at left shows a Toroid Red ’E’ Iron core
and is used in a QRP CW-transmitter (morse-code) application
in the 30-meter band.



Sorry, comments are closed!