Stereo audio amplifier using ic TDA2822


This circuit stereo power amplifier. By use ntegrated circuit number TDA2822 within be model Dual Amp give power watt at 1W +1W bandwidth expansion rates at 40dB 120kHz use power supply since 1.8V 15volt and use current 6mA feed power supply 9volt reach the circuit C7 will perform filter fire level smoothly then go to feed power supply give with IC1 at 2 input signal pin will on the left and right that come in to change VR1 and VR2 for fine decrease popularity level has of the sound already coupling change C1 and C2 from that time pass by reach input of IC1 at 7, 8, 6 pin and 5 respectively from that time a signal had that to enlarged then go out 1 pin way.

Stereo audio amplifier using ic TDA2822

Which be output of the channel a signal on the left and pin 3 ways are output of the channel on the right by a signal output of left channel and right channel will change C3 and C4 signal coupling reach a loudspeaker. By have R1, C5 and R2 C6 perform eradicate the noise of each the channel goes out.


Sorry, comments are closed!