Mini-drill, pcb minidrill, print boormachine, adjustable powersupply


Stabilized 9V power

Parts List: T1 = 115/10 VAC transformer. Center Tap (ct) not needed.IC1 = uA723, LM723, or equivalent. Q1 = 2N3055, NTE130, or substitute. (TO-3 case) Mount on a coolrib!BR1 = 80V-5A (or better) R1 = 0.56 Ohm, 1 Watt, wire-wound type, 5% R2 = 750 Ohm, 5% R3 = 2K7 (2700 ohm) P1 = potentiometer, 1K, Linear C1 = 2200uF, 35V C2 = 470pFA parts kit (no pcb) is available: [Click Here]

Notes:
C1 filters the noise and spikes off the AC.Adjust the circuit for 9V or 12V output voltage, or whatever voltage level your pc mini drill is using, with the P1 potentiometer.
Q1 can also be a MJ2955 in a TO-3 case.



Sorry, comments are closed!