Classroom Microphone


This Audio Amplifier
circuit is useful in classrooms to reduce the strain of lecturing ,if
the surrounding environment is noisy. It uses the power amplifier IC LM
380 that gives 2 watts output which is sufficient in a confined area.
The Amplifier is portable and the whole circuit and the battery can be
enclosed in the Speaker box itself.

Classroom Microphone Circuit

Classroom Microphone Circuit diagram

The circuit uses a preamplifier stage around NPN transistor BC 548 and a power amplifier around LM380.An external Collar MIC
can be given to the input using an audio jack .The voice signals are
amplified by T1 and fed to IC1 input through the volume control VR.
Capacitor C3 reduce the undesirable howling from the speaker.

LM380 is the general purpose audio amplifier and its gain is
internally fixed at 34 dB. Its output is short circuit proof with
internal thermal limiting. The IC works between 5 to 22 volts DC and is
dual in line version.

LM 380 Pin connection

LM 380 Pin connection

Assemble the circuit on a common PCB. A 9
volt PP3 battery can be used to make the unit compact. If the amplifier
is used for many hours, a 6 Volt 4.5 Ah rechargeable battery is a nice
choice. If it is used, a charger input facility should be provided .Use a
small good quality 8 Ohms speaker. If the output is not sufficient, use
a high power amplifier IC circuit in the place of LM 380.

LM380

LM380

{image4}


Sorry, comments are closed!