Build your own printer cable LCD Display – Path 2


Img_5

 

Unpack the LCD, and spend some minutes recognize it’s parts.

Img_6

 

This is the front side of the LCD module. You can clearly see the 1-16 pins, and the A and K pins (at the left of the image) that used if you want to power the backlight independently. We will not use them.

Img_7

 

This is the back side of the LCD module. The two black circles you see are the controller chips. You can also see the 1-16 pins and the A and K pins.

Img_8

 

 Now take the male pin array

Img_10

 

 Cut 16 of them if you have a LCD with backlight or 14 otherwise.

Img_11

 

Fit them at the back of the LCD

Img_12

 

 Turn over the LCD and solder the pins from the upper side.

Img_13

 

Here you see the pin array soldered

Img_14

 

 Now take the female pin array and cut the same number of pins you cut before.

Build your own printer cable LCD Display   Path 2

Img_16

 

It must fit the male pin array like you in at the left images.

 

<< [Previous Page]Continue with wiring [Next Page] >>

 

 


Sorry, comments are closed!